Windows Diary

Help Fix Virtual Console EEPROM Output Device Error

Posted on by Brian Magallanes

Approved: Fortect

  • 1. Download Fortect and install it on your computer
  • 2. Launch the program and click "Scan"
  • 3. Click "Repair" to fix any issues that are found
    • Speed up your computer's performance now with this simple download.

    If you notice the virtual console of the Eeprom output device, this guide will help you.

    Sun ILOM Remote Console is a Java application that allows you to remotely redirect and control the following devices on the master server:

    • keyboard
    • Display video console
    • Mouse
    • Storage devices or sample images (CD / DVD)

    Approved: Fortect

    Fortect is the world's most popular and effective PC repair tool. It is trusted by millions of people to keep their systems running fast, smooth, and error-free. With its simple user interface and powerful scanning engine, Fortect quickly finds and fixes a broad range of Windows problems - from system instability and security issues to memory management and performance bottlenecks.

  • 1. Download Fortect and install it on your computer
  • 2. Launch the program and click "Scan"
  • 3. Click "Repair" to fix any issues that are found

    • (Device group is often abbreviated as KVMS.) The remote console must be supported by the Sun Blade T6340 server software. Remote Console Connection to Corresponding Gadget 2 in FIG. 5-1. For more information on the connection options for the Sun T6340 Server Blade Module shown in FIGURE 5-1, see the Sun T6340 Server Blade Module Getting Started Guide and the Sun T6340 Server Blade Installation and Administration Guide.

    Sun ILOM Remote Is xbox 360 for Sun x64 Servers in the current Sun Integrated Lights Out Manager 2.0 User’s Guide (Chapter 12, Management – Remote for x64 Servers Using Remote the Sun ILOM console “). Most of the information in yourThe user manual applies to Sun Blade T6340 Server Modules. This chapter describes the differences prior to remote console management with and including Sun Blade T6340 server modules.

    Drawing legend

    1

    Server (local or remote)

    6

    Computer connected for you to use the CMM RJ-45 serial port
    eeprom output device virtual console

    2

    Computer connected to RJ-45 Ethernet (connect to remote ILOM console)

    7

    Computer connected to the RJ-45 serial connector on the adapter cable.

    3

    Connect an Ethernet cable to the RJ-45 Ethernet port on the Chassis Power Management Module (CMM) (NET MGMT 0)

    8

    Keyboard, video monitor, mouse (local KVM)

    4

    CMM with two connections

    9

    RJ-45 serial to USB-2 adapter cable with dedicated 15-pin HD (VGA) connector

    5

    RJ-45 cable connected to the serial port of KMG (SER MGT)

    10

    Sun Blade T6340 Server Module with Special Processor (SP)

    eeprom output device virtual console

    Before using the remote console with the Sun Blade T6340 server module, you mustYou need to configure the host: usually

    • If you want to run tasks remotely using OpenBoot output and the current ok request, see Configuring a Host to Use a Remote Console. with OpenBoot.
    • If you want to work remotely from Solaris, see Configuring Remote Console Publishing Using Solaris.

    Configure The Host To Use A Remote Console With OpenBoot

    To use OpenBoot with a remote console, you must set the OpenBoot input and output device variables to really appropriate values. By default, the virtual console is used for a number of variables. This virtual console value is always the text stream console that is redirected to the SP ILOM. In fact, you can convert the OpenBoot input device and the settings output device so that the ILOM SP text console only shows the power-on self-test (POST) output, not the OpenBoot output, the ok prompt, or the Solaris boot output. …

    Warning – Be careful when setting OpenBoot input and output variables. For example, if you have configured them for devices that are not always available, you cannot currently or enter the ok prompt when the devices are not available. In this case, you must reset the actual reset value of both variables to their default values. For more information, see Resetting Variables to Use Default Settings.
    Name = “50450480_pgfId-1003049″>

    On the OpenBoot command line ok or on Solaris, use one of the following procedures to change these input and output device settings.

    To Name = “50450480_pgfId-1003050″> Configure Host At OpenBoot Prompt

    1. Establish a local working relationship with the millWith a card console on the machine module.

    For more information on establishing a local connection, see the Sun Blade T6340 Server Unit Installation and Administration Guide.

    To use the standard console, your values ​​must be OpenBoot input-device and output-device Conditions are set for the escape value virtual-console .

    If you see the entire ILOM prompt ( -> ), you are in the actual service, not the console system. alone. Start the system console:

    If customers see a ok message on the device, go to step 3.

    If the Solaris operating system type is running, change the host on the Solaris Operating System or cause the operating system to crash.

    If Solaris is running, a Solaris query for analysis is displayed. You can use the Configure on Host task on Solaris.

    If you would prefer to customize yours in response to the ok request, you must orderRun Solaris to access some ok <. access / kbd> hint. The preferred method for receiving the ok prompt is to start the operating system by entering the appropriate command (for example, init , as well as the uadmin > command) as described in the panel documentation Solaris management.

    If, for example, you enter init 0 on Solaris in time, the system will start you gradually ok command line:

    Note on rkeyboard and rscreen Speed up your computer's performance now with this simple download.

    Related Posts: