Approved: Fortect
Here are some simple steps that can help you fix the non-system disk error problem.
Hp-concentrate-wrapper-portlet
ActionsThis document is for HP notebook computers with Windows High Performance and Windows Vista.
Information About Hard Drives Without System Errors Or Hard Drives With Errors
The message “Non-system disk error” or “Disk error only” may appear if the entire BIOS of the computer cannot find the boot system on one of the available storage monitors in the boot path of the laptop.
When the laptop starts up, it checks several devices in a predetermined order, just like operating system devices. You can change the order by searching by changing the boot store in the system BIOS.
On the other hand, to troubleshoot a download failure or non-system black f For a disk filter, use several of the following methods. Different models and BIOS versions may provide different methods of accessing the hard drive diagnostic tests.
On many models, press the F10 key while working with financial services to enter the BIOS setup environment, and then select the hard drive diagnostic test.
-
On some models, the F2 key is displayed in the logs while the error message is displayed. In this case, the F2 key opens the BIOS environment and makes it possible to conduct a diagnostic test of the hard drive without systematizing the computer.
-
On some 2008 and later models with UEFI pre-boot, you are prompted to press the F2 key. You will then have access to diagnostic tests for your HP PC hardware.
Remove The Exact Non-system Hard Drive From Your Computer
Since this boot order can be changed, the computer may access a non-operational system disk containing the CD / DVD optical drive. Do the followingThe next steps are to remove all non-system devices and restart your computer.
-
Disconnect all USB devices, these might be 1394 (Firewire) devices connected directly to the computer. All
-
Remove CDs and DVDs from drives.
-
Press and hold the power button for 15 seconds to turn off the computer.
-
Press and hold the power button to turn on the electronics.
If the computer boots correctly after removing the actual non-system CD, reset the BIOS to default boot order as described in the following method.
Start My Reset Sequence
On most models, during the boot process, press F10 to enter System Setup, select Boot Options, then Boot Order to view the boot sequence. Change the sequence to default settings, press F9, and then click Yes to change the default settings.
Test The Battle Engine.
Approved: Fortect
Fortect is the world's most popular and effective PC repair tool. It is trusted by millions of people to keep their systems running fast, smooth, and error-free. With its simple user interface and powerful scanning engine, Fortect quickly finds and fixes a broad range of Windows problems - from system instability and security issues to memory management and performance bottlenecks.
Many problems with starting your computer are caused by minor bugs in the software that manages the storage of files on this drive. The hard drive test will identify and correct these errors, but it certainly won’t give a detailed report of all of its actions if it is exhausted. There must be a good physical connection between the hard drive and the computer to perform the test. If the computer is dropped or shaken, the hard drive may move and disconnect, which could cause the entire test to fail or prevent it from running.
Run HP Hard Drive Self Test
Follow these steps to check the hard drive for errors using the HP Hard Drive Self Test.
-
Connect a new adapter to your computer.
-
If your computer turns on frequently, press and hold the power button for 15 seconds to turn off your home.
-
Press and release the power button again. Just turn on the computer and immediately press each toPress F10 several times to open the BIOS setup window.
-
Use the right arrow key to select the Tools or Diagnostics menu.
Mark:
Your BIOS version usage may differ slightly for menu items.
-
Select a self-test drive.
If the BIOS does not have a hard drive self-test, run the EUFI hard drive test.
-
Click the “To” button to start checking.
The self-test process can protect both a quick test and a full test. It also gives an estimate of the length of the exam.
If all tests pass, the entire hard drive is intact.
-
If the test almost fails, contact HP support for instructions.
After the hard disk self-test completes, the computer will restart to see if the problem is resolved.
Run EUFI Hard Drive Test
If your BIOS version has almost no hard drive self-test, all EUFI hard drive tests will be performed. Hard disk testmaybe six. Try some quick tests first (2-3 minutes). If the rapid test does not reveal a headache, take a detailed test (2 more or more).
Video of detailed testing of UEFI disks
Follow these steps to run one of our quick hard drive tests:
-
Press and hold each power button until the computer turns off completely.
-
Turn on your computer.
-
Immediately press the F2 key several times, about once a second, until the phone screen appears to diagnose HP PC UEFI hardware.
-
Select the Tests component from the UEFI main menu.
-
Select “Hard Drive” from the “Unit Tests” menu.
-
On the Hard Drive Tests menu, click Quick Test.
-
Click Run Once.
-
A quick test of the hard drive will start. If the computer has more than one hard drive, someone will be prompted tochoose a hard drive. Select the hard drive you want to test, or test all hard vibrations at once by selecting Test to select all hard drives.
-
When the test is complete, the final results will appear on the screen. The latest test can also be found in the test logs in the main menu.
If your hard drive passes the quick test, but the problem with your own hard drive is still not resolved, run a detailed test. This test includes a SMART test, optimized Daylight Saving Time, Daylight Saving Time, and Extended Daylight Saving Time.
Mark:
Detailed hard drive tests can be run individually by clicking the actual test in the Hard Drive Tests area and then clicking Run Once.
-
From the Hard Drive Tests menu, select Deep Test.
-
Immediately after that, click “Run”.
Speed up your computer's performance now with this simple download.We cut in the direction of strength.We remove the battery if the program is a laptop.Remove the system hard drive.Reinstall the system drive.Reinstall the battery if it can be called a laptop.Turn on the computer.Enter BIOS and configure your computer to boot from the installation CD.Wait while Windows downloads the files.
The message “Non-System Hard Drive Failure” or “Hard Drive Failure” may appear if the individual BIOS cannot find the operating software being loaded on any of the storage devices contained in the system boot path. At startup, the laptop checks multiple devices as an operating system in a given order.
Usually the computer is restarted.Open BIOS.Go to the Startup tab.Change the order of the hard drive as the first option.Save these type parameters.Reboot your computer.
