@GabrielaGarcia Before posting my question, I would say the original question: I tried using sneakers with USB-CDROM, but it didn’t give good results. I also tried the above but was unable to select the boot device. After asking the question, I copied the CD to a USB stick and did some exercises. So I still don’t know how to choose the boot priority, but I did – install an alternative OS so that I no longer have to fix the original difficulties and consider the case closed. Thanks for your efforts. – ds September 18, 2018 4:40 PM
This article describes how to configure the AMI BIOS to boot the computer from the show USB drive.
Insert a recently used USB password recovery disk and set up your new computer to start the car from the USB drive. If your BIOS is AMI, follow the instructions.
1. Restart your computer and immediately press the “BIOS Enter” key, for exampleF2 / Clear until the BIOS setup screen appears. You can see this: This is how you can access your BIOS by entering the BIOS key.
2. If you are looking for the boot instructions in the BIOS setup screen, in this example it is called “boot”. You can use the â † / â † component to open it. Press Enter and you will see a submenu that determines the boot order of the PC player.
5. Select “USB: Your Brand”, usb and press “Enter” key to set USB stick as the first base boot option.
6. After that, you will see the USB stick on the auto download site.
7. When finished viewing operations, press “F10” to save and exit. Select “OK” and press the “Enter” key, after which the computer will restart and boot directly from the USB drive.
This guide shows you how to configure your computer to boot from USB / Flash drive by changing the device-related boot order in the AMI BIOS setup.
Connect the password recovery hard drive created withUSB storage, and configure your computer to boot directly from USB. If your BIOS is AMI, follow the instructions. It’s simple, but important.
1. Press F2 / Del (this is how you simply invoke BIOS SETUP with the BIOS key) as soon as possible while your computer is rebooting until the BIOS SETUP screen appears.
Fortect is the world's most popular and effective PC repair tool. It is trusted by millions of people to keep their systems running fast, smooth, and error-free. With its simple user interface and powerful scanning engine, Fortect quickly finds and fixes a broad range of Windows problems - from system instability and security issues to memory management and performance bottlenecks.
1. Download Fortect and install it on your computer
2. Launch the program and click "Scan"
3. Click "Repair" to fix any issues that are found
2. On the BIOS setup screen, find the boot related tab and select the boot menu using â † / â †. Use the key to mention “Hard Drives” and press “Enter”.
3. Use the “/” button to select “1. Disk ”, the popular“ Enter ”key.
4. Go ahead, enter the boot parameters, and then look at the priority of the boot device item.
6. Select Kingston “USB: DTG (2G)” and press “Enter” to set the USB storage type as the first boot option.
7. The USB flash drive is now the first boot device.
8. Press “F10” to save and exit the software, then select “OK”, press and press “Enter”, the computer will restart and boot from USB.
Use the ↓ / ↑ buttons to select “1st Drive” and the “Enter” button.Enter your boot parameters, then look at Boot Device Priority.Enter hard drives.Choose aSee “USB: Kingston DTG (2G)” and press “Enter” to set the USB drive to send as the first boot option.
Go to the “Boot” tab in the BIOS settings.Select Boot Option # 1.Hit Enter.Select your USB device.Press F10 to save and exit.
1. Connect your piano and mouse and press F1 on your keyboard. 2. Click “Start” and press “F8”.
