The Windows disk read transaction requires a motherboard memory controller, unlike people using the BIOS setup program. Windows usually installs thousands of hard drive drivers, but if your motherboard was detected after the release of Windows 7, chances are your drivers aren’t overloaded causing the hard drive to stop being detected. You can see the hard drive during BIOS setup, but Windows can’t get it to boot.
Symptom: The Drive Won’t Mount
Your computer has a netbook hard drive and a file manager open, but , to your dismay, there is no disk icon associated with the hard drive. Computer, your hard drive is faulty and recognized, and you plug the CD into another PC, and you end up with the same result.
How do I get BIOS to detect my hard drive?
When you turn on your computer, press F2 to enter system setup, or perhaps even CMOS setup.Go to the BIOS input page.Make sure Hard Disk Access Detection is set to Auto at power on.If not, help him activate it.Tap Save Changes and Exit.
When You Reinstall Windows 7/Windows 8, No Drive Is Detected
/h2>LSI 9271-8i RAID Controller Card, LSI 9460-16i RAID Controller Card, Or LSI RAID 9440-8i Offload Controller Card Is Currently An Option On The Precision T3610, T5610, T7610, 5820 Tower, 7820 Tower, Or 7920 Tower. If Your System Is Equipped WithWith This Optional Controller Card, You Will Be Prompted To Install The Driver For The Card First During A Clean Install Of Windows 7 And Windows 8.
Why Is My Hard Drive Not Working? Nothing? Is Something Else Showing Up?
Either a driver issue, or an internet connection issue, or incorrect BIOS settings could be to blame if your new hard drive isn’t recognized by Disk Manager on your computer. Luckily, this is certainly an easy fix.
How do I fix hard drive not detected Windows 7?
Use the hard drive of another laptop and see if it is recognized.Try a different USB transport.If you are connecting the player as a USB hub, try connecting it directly to your computer.If your company uses a cable to connect the drive to your computer, try several cables.
How do I fix BIOS not detecting hard drive?
Restart your computer and enter the created system (BIOS) by pressing F2.Check and enable disk detection in engine configurations.Turn on automatic detection for future use.Reboot,and also check if the drive is visible in BIOS.
Why Is The Hard Drive Suddenly Not Recognized?
The BIOS will be far from recognizing the hard drive if the statistics loop is damaged or the connection can be considered faulty. In particular, Serial ATA cables can sometimes fall out of connection. Make sure your SATA cables are often securely connected to the SATA input port.
