Sometimes your computer may display an error code indicating that a USB partition will be created in Windows. This problem can be caused by a number of reasons.
Right-click the USB drive and select Create Partition. You can also run on a USB stick and select “Create Partition” from that dedicated left panel. Step 2. As you can see, enter the size and drive letter of the other partition.
Full support for multiple partitions for each USB stick was introduced in Windows 10 starting with Build 1703 (Creators Update). Now, almost any Windows 10 user can access partitions on a USB drive (or SD card) and create various logical partitions on such media using the built-in tools of the operating system. Previously, when I plugged a multi-pane USB drive (created in Linux or used with third-party tools) on a Windows computer, only the first rudimentary partition was displayed (all other partitions were ignored). Normal operation with multiple partitions in Windows was only available for drives identified as mounted (fixed / local).
As a reminder, popular hard drives (and USB hard drives) are considered basic in Windows, while USB drives and SD cards are removable. The operating system recognizes the type of disk by a special descriptor RMB (Removable Media Bit), depending on the device controller. PeBefore that, we thought how to replace the controller result with a special Hitachi microdrive driver (turn a USB flash drive into a local hard drive in Windows).
Windows 10 Creators Update (and newer) will automatically display all available partitions on a USB stick or plastic SD coin and ignore the RMB bit. In this case, the USB drive will always be selected as removable media. A
How Do I Create Multiple Partitions On A USB Stick In Windows 10 Only?
Let’s try to create some partitions associated with a USB storage device in Windows 10. Let’s assume that a primary partition has already been created on a USB storage device, which usually takes up the entire space of a USB storage device. We will compress it and create the following (and next) sections:
Connect the USB support to the USB port of the computer;
Format the USB drive with an NTFS file gadget, then open the Disk Management Console (diskmgmt.msc);
Right-click the USB storage section and select the “Volume Down” option from the perspective menu;
After clicking the Minimize button, specify the total amount of free space and reduce it. For example, we only want to create two 7GB and 8GB partitions on an expensive 15GB USB device;
Right-click the unallocated area of the disk and select New Single Layer to create an additional partition;
As you can see, we have recovered a USB stick with two partitions. The first partition is formatted with NTFS and the second with FAT32. Both sections were displayed and used in Windows.
Share Your USB Drive In Windows 10 Using DiskPart
You can also use DiskPart CLI tool to create multiple partitions on this USB stick. In this example, we will try to create two partitions, the first with the fat32 file system and the second with NTFS (you cannot create an awesome FAT32 partition from the disk management console GUI).
Open an elevated command to run and run the DiskPart command. Within Diskpart, you may need to run the following commands in order:
List of hard drives Select here <, you really need to enter the hard drive number assigned to the USB stick on your own system take awayCreate main partition size = 3000 quickly format fs = fat32 label = "FirstFAT32Partition" Assign letters = J active create main section fs format = ntfs quick label = "Data (NTFS)" Assignletters = K flight list exit
Create Multiple Partitions On The USB Stick Using PowerShell
Fortect is the world's most popular and effective PC repair tool. It is trusted by millions of people to keep their systems running fast, smooth, and error-free. With its simple user interface and powerful scanning engine, Fortect quickly finds and fixes a broad range of Windows problems - from system instability and security issues to memory management and performance bottlenecks.
1. Download Fortect and install it on your computer
2. Launch the program and click "Scan"
3. Click "Repair" to fix any issues that are found
You can also create multiple wall structures on a USB stick using the built-in storage module PowerShell cmdlets.
The following command deletes all data received from the USB device memory.
Use PowerShell read commands to create and configure two logical wall surfaces on a USB stick:
New partition - DiskNumber 1 - size 4 Go -DriveLetter J Format-Volume -DriveLetter J -FileSystem NTFS -NewFileSystemLabel USBVol1 New partition - DiskNumber 1 - UseMaximumSize -DriveLetter K Format-Volume -DriveLetter K -FileSystem Fat32 -NewFileSystemLabel USBVol2
Please be aware that USB drives with multiple partitions will only display correctly on Windows 10 and newer 1703. Earlier versions of Windows will displayOnly the first section is affected.
If Windows does not assign drive letters when connecting a USB flash drive with several partitions, the Virtual Disk expert services settings according to the article are not taken into account.
Why would a person need multiple partitions on a USB drive?
If the USB stick will be used in different operating systems with different data systems (for example, Windows and Linux / Android);
The easiest way to hide topic data from a USB stick;
If you are using a USB stick to start and restore Windows on UEFI computers. The fact is that a computer with UEFI can only boot from a FAT32 drive. However, you cannot put a file larger than 4 GB in it (limitation of the FAT32 file program). Therefore, you need to split the Install windows.wim file into several parts (see example here), create a second NTFS partition on a specific bootable USB device, and copy the WIM / ESD file configured there.
Right-click the USB drive and select Shrink Volume.Enter the desired partition size and click Collapse.Right-click the unallocated space and select New Simple Volume.Adjust the size of the partition and see next.Vtype in the drive letter and click Next.Select your formatting preferences and click Next.
Open this Windows search box and type diskmgmt.Right click on the subject of the external hard drive and select Shrink Volume.Enter the space through which you want to decrease the volume.Then click “Reduce”.Right-click an unallocated property on disk and select New Simple Volume.
Open Start.Look for Disk Management and only the best score to open up a specific experience.Right-click the unallocated space and select the New Simple Value option.Click the Next button.
