In some cases, your system may display a message with BIOS settings f2-8500cl5d-4gbpk. This error can have several reasons.
Approved: Fortect
hee, I have a huge Dell XPS desktop. lately it started looking strange: when I press the ON button it starts up as usual, but after a second the fan goes to the maximum level possible, the display doesn’t even start, the mouse / keyboard doesn’t work. it makes a noise like an airplane ready to take off, our fan noise gets too loud. I don’t turn on at the same time as it can burn the buff and turn it off by holding the button for a few seconds. Every time this happened, I updated this BIOS and performed a factory reset. I definitely have a “diagnostic disk” for this PC, to put it simply, I’ve been trying to run it all day and no luck. I take out almost all the parts and often see what the problem is, but right now I don’t have time. I’ve seen something like this where BIOS won’t boot, display won’t boot, with cpu ****. I don’t think the processor is the cause. I just cleaned / vacuumed it too. Therefore, lately, dust has not been the cause. Motherboard ? Fan?
has anyone had the same experience?
Fortect is the world's most popular and effective PC repair tool. It is trusted by millions of people to keep their systems running fast, smooth, and error-free. With its simple user interface and powerful scanning engine, Fortect quickly finds and fixes a broad range of Windows problems - from system instability and security issues to memory management and performance bottlenecks.Glass I found this thread unique and I’m sorry to hear about your 8GB RAM issues doing it with this RAM.
Approved: Fortect
If I run everything that is available, that is, a card with a specific NB-Strap at 333 and my CPU FSB at 333×9 (E8400) and so I choose 1066mhz Everything 5-5-5-15 if it doesn’t hurt about 2. 0 B. RAM in their biographies go out of their way, so Memtest and everything else I use on the product all day, day in and day out, visiting it.
………. But from the moment I start overclocking my system, this RAM will not work at 1066 MHz for a long time, even at 1052 MHz, no matter what voltage I apply, I use 525 FSB. on board, with my CPU running at 4.2GHz (x8 Multi) at 1.435V, 1052MHz RAM at 2.06V, vFSB = 1.3, vPLL = 1.54, vNB = 1.36, and i have problems with memtest, i have come to the conclusion that this ram cannot control higher speeds on the card, it can work fine anyway on a system that is not overclocked at all, but probably wON doesnt even do its own inventory in overclocked system.
Intel I7 Core 920 2.66 GHz @ 4, HT 3 GHz Enabled, Core @ 1.34 V, VTT @ 1.28 V, NB @ 1.30 V (212 x 21) Lot number: 3910A369
6 GB G (3×2 GB) .Skill RipJawsX DDR3 17000C9 – 2133 MHz 1640 MHz 8-8-8-24-1T
Gigabyte G1.Sniper Rev 1.0 – Bios 205fsb Beta
1 x OCZ Agility 5 120 GB SSD, AHCI
1 x Western Digital 500 GB SATAIII HDD 16 MB cache, AHCI
Sony +/- Film R / RW / RAM x22 Double Layer, AHCI
2 x Saphire ATI Radeon R9 270 2 GB (Crossfire)
Modular power supply unit Gigabyte Odin 850w (software control)
EK Supreme HF, copper LGA1366, pump Laing D5, 2 chillers 240 mm and chiller 120 mm
LAN Cooler Master HAF XB Box
Windows Se7en Pro x64-bit.
