Best Way To Reinstall Windows XP On Asus Eee PC

Approved: Fortect

1. Download Fortect and install it on your computer

2. Launch the program and click "Scan"

3. Click "Repair" to fix any issues that are found

Speed up your computer's performance now with this simple download.

If you have noticed how to reinstall Windows XP on Asus eee PC, this guide will help you. Connect your USB stick to your company’s Asus Eee PC, start the netbook and change the BIOS settings that way. On the first screen, press F2 to enter the BIOS menu. Go to the Advanced tab in the BIOS menu and change the operating system setting to Start. Then go to the Hard Drives tab> Boot and select your USB drive as the first one.

g.Connect USB dongle to Asus Eee PC, start this netbook and change your BIOS. On the first screen, press F2 to enter the BIOS menu. Go to the Advanced tab in the BIOS menu and change the operating system setting to Start. Then go to Hard Drives Hard Drives A hard disk drive (HDD), hard drive, hard drive, or hard drive is usually an electromechanical storage device that stores and retrieves digital data that works with magnetic storage, and all or part of the data is quickly lost. rotating rigid plates made of magnetic material. https://en.wikipedia.org ›RSS Feed› Hard_disk_drive Hard Disk – Wikipedia> Boot tab and select the entire USB drive as the direct drive.

I recently bought a fully charged obsolete electronics when an e-waste bag was thrown in my backyard!

By preferring reuse to recycling for money, I saved everything I could and spent the rest on good disposal tips (hard drive recorder), but Asus EeePC 1001P netbook:

I already bought an EeePC (1000H) which I really like and still sometimes use it when I need a Windows installation (I’m a Mac user now).

This 1001P is two years newer than my 1000H – thinner, lighter and more durable than a 160GB hard drive instead of 80GB, and your 1000H now has a vibrating fan, which probably always does.on my way. So it would be good against each other if one of those skills worked again.

But it had no power supply, keep that in mind, and it requires 19V / 2A instead of 12V like the 1000H. I took apart my 19V desktop power supply and it did turn on. Because I took apart an old Dell 19V laptop power supply for a more permanent solution. As with my The 1000h, the battery is discharged, so it should only work when connected to AC power.

This 1001P originally shipped with Windows XP Home (license sticker on certain bottom side), but has been updated to Windows 7 Professional. It was password protected, but I was able to reset the admin password . But then he still wanted to connect to the domain controller and I can’t find a way to turn it off. Then I tried to go back to the great system restore point (hopefully before it joined the domain, but not the controller), which the experts said had completely finished the installation.

Oh geek, let’s reinstall Windows XP. Unfortunately, when installing Windows 7 had to delete the Asus F9 recovery partition, it didn’t work.

Then I tried to restore the XP recovery image to DVD that came with the 1000H (using a very USB DVD drive) which looked good but then crashed when I tried to start.

I then installed from scratch and selected the OEM Windows XP SP2 Home boot disk that I had from another computer.

Many internet searches later told me that this was because the installer did not have SATA-AHCI drivers to access my hard drive. And XP can only load drivers from a floppy disk (which the EeePC doesn’t have… ™) or from a roaming installer image. It was possible to extract the image from the XP boot disk, insert the drivers and write the image again, but it felt like hard work and learning all the tools. And only Windows, I have a Mac.

Replacement is an instruction from the BIOS to provide the hard drive as an IDE. Here’s what I did. BIOS F2 from -> Advanced -> IDE -> Configure SATA as IDE -> Save and Exit. References: ref1, ref2.

Next problem, installation, after immediate activation of Windows was required before being connectedwe. However, Internet activation failed and telephone activation responded by reading the install ID while the install ID was empty!

I found reviews and apparently Service Pack 3.0 will solve this problem, so I kept the XP SP3 installer and saved it to a USB hard drive (formatted though Master Boot Record / So fat32 is easily accessible from XP). Then I started XP in Safe Mode and ran the installer. He warned that this shouldn’t be fixed in Safe Mode unless Windows is worn out and that’s the only option. I continued and it looks like he fulfilled his role.

After a reboot, the install ID was like this, but Internet activation still didn’t work. I tried phone activation, but on the phone, the voice menus were blocked after activating Windows 10, so what was … It’s unclear if I could actually activate XP since it’s at the end of its lifespan. After waiting a few minutes to no avail, I gave up.

It looks like Windows XP was first hacked a long time ago. Since Microsoft has stopped activating XP and my best copy isWhile legal (I have a driver’s license sticker, I’m reinstalling it on the above device), I have no moral concerns about bypass activation.

[edit, the following seems to work, but doesn’t work after 30 days. He says that you must activate it. However, if you try, Windows will show that it is already activated. It looks like other people have the same problem and this approach doesn’t work. I left a trail of my attempts here.]

• • Boot -> F8 -> Safe Mode with Command Prompt
  • regedit
  • Open HKEY_LOCAL_MACHINE SOFTWARE Microsoft Windows NT CurrentVersion WPAEvents OOBETimer
  • go to FF D5 seventy one D6 8B 6A 8D 6F D5 thirty three 93 FD
  • if LastWPAEventLogged is present, remove it.
  • Right click WPAEvents -> Permissions, select SYSTEM, enable Deny Full Control

• I tried to add the key HKEY_LOCAL_MACHINE SOFTWARE Microsoft Windows NT CurrentVersion WPAEvents LastWPAEventLogged and set it to d5,07,05,00,06,00,07,00,0f, 00, 38.00, 24 in put, 00, fd, 02 bis. No difference was found.
• Right click on WPAEvents Permissions -> select ‘ SYSTEM ”, uncheck the box“ Deny full access. ”Now it says that it needs to be activated and use it to activate it. I identified this internet activation and this time remember that! Remember, I had a real password, which I already entered, figured out, just didn’t accept it last time. Who knows what changed this time? Hope it works now. Me

Then everyone usually installed Asus drivers. They will still be available from 2019, but who knows how much more they will have? I saved copies only on the inner sleeve.

• Some drivers I installed through Device Manager, some through Workers – I remember there was a reason for that, but I can’t remember!
• I unzipped the zip files on Mac before they were ported to the EeePC. Put hidden Mac files in a folder, which confused Windows because some of the DLLs associated with them looked like DLLs. The installers complained about invalid DLLs, but somehow worked (since they weren’t really DLLs and therefore not needed).
• None of the camera drivers worked,but then Windows recognized the camera as a standard USB camera and that’s enough for me.
• I have not installed ExpressGate (a relatively limited quick launch shell) because I don’t find it useful.
• When installing the LAN driver, I recommended choosing Atheros / 8181 / WinXP2003_32.
• KB (the filter listed as this utility) is actually a driver and I think it is definitely needed for some special function keys. Required
• Wi-Fi can be enabled using the F2 function. My Didn’t 1001p didn’t work with any of the included drivers from Asus. Device Manager
  Speed up your computer's performance now with this simple download.

  How do I factory reset my Asus Eee PC Windows XP?

  Turn off your Eee PC.Turn on the device and press the “F9” key when the flash test (logo) appears.At the bottom of each list in the menu, select “Restore Factory Settings” and select “Yes” when prompted to confirm the new reset.

  How do I install Windows on my Asus Eee PC?

  Make it constructive, all your files are verified.Reboot the eee PC.We insert the USB flash drive.When the POST screen is displayed, press the ESC key.Select USB storage from the sneaker menu.The Windows 7 installation should now start as usual.

  How do I wipe and reinstall Windows XP?

  Start your computer.Hold down the F8 key.Under Advanced Startup Options, select Repair your computer.Hit Enter.Select the keyboard language you are learning and click Next.When prompted, log in with an administrator account.In the system recovery options, select System Restore or Startup Repair (if beforestupno)

  

  

  Brian Magallanes

  Related Posts:

  • 

    Asus Eee Antivirus Troubleshooting Made Easy

  • 

    Best Way To Completely Reinstall Windows 7 Update

  • 

    The Best Way To Fix Can't Reinstall Microsoft…

  • 

    Best Way To Solve Asus Bios Update Problem

  • 

    The Best Way To Solve Problems With The Best…

  • 

    An Easy Way To Fix Hard Drive Failure Is To…