You should read these fix recommendations if no Windows 8 Sony Vaio Solucion operating system error code is found.
Approved: Fortect
Get the “Operating System Not Found” Boot Error Fix for Windows XP, Vista, 8, 7, 8.1, or Windows 10.
This bug is also very common for Sony VIO, including laptops, T-series ultrabooks and not only S-series.
Via “Operating System Detected
The information and facts about this error below were compiled using NeoSmart technologies based on information provided by our engineers, developers and technicians from the global network or data processing organizations.
Description And Symptoms
The following error messages, warnings, warnings, and therefore symptoms are associated with the above error.
Symptom 1: “Operating System Not Found” Error When Starting The Computer
When the PC boots, the BIOS tries to find an available operating system on the hard drive to boot. However, if this item does not find it, it will show the actual “operating system not found” error. May be caused by a serious BIOS setup error, improper gain, or damage to the Master Boot Record.
A really functional system was detected
Another possible error message is “No operating system”. This bug is also quite common in Sony Vaio laptops.
Causes Of Some Errors
How from Naturally, this error has one of the following reasons:
Reason 1. Incorrect BIOS configuration
Since this error occurs when the BIOS cannot find the operating system, it is often a good idea to check the BIOS settings first. BIOS setup can be corrupted due to power failures, hardware failures, or manual BIOS setup errors.
Reason 2: BCD corrupted
Likewise, there are certainly no errors in BCD, and BCD is a corrupted item. This instruction error can also occur if the BCD is simply damaged.
Reason 3. Defective data cable
If the BIOS cannot recognize the hard drive, faulty data cables are often to blame. Try unplugging them and then plugging them back in or even replacing them completely and see if the problem persists.
Removed “Operating Configuration Not Found” Message On Windows
Windows installation CD / DVD required!
Some of the solutions below require a Microsoft Windows installation CD. If your computer does not have a Win installation CDdows or you no longer have your Windows media, you can use Easy Recovery Essentials for Windows. EasyRE will detect and fix many problems automatically and can also be used to fix the problem by following the instructions below.
Fix # 1: New Creation With Bcd Easy Recovery Essentials
Easy Recovery Essentials Forex Trading System One-Click Recovery fixes problems caused by questionable BCD by recreating it from scratch on an efficient boot partition. This is done automatically as part of an automated recovery process and does not require any manual or user intervention.
Fix # 2: Change Or Reset BIOS Settings
Approved: Fortect
Fortect is the world's most popular and effective PC repair tool. It is trusted by millions of people to keep their systems running fast, smooth, and error-free. With its simple user interface and powerful scanning engine, Fortect quickly finds and fixes a broad range of Windows problems - from system instability and security issues to memory management and performance bottlenecks.
Since this error often occurs when the BIOS cannot find the hard drive, checking the BIOS settings can be a good solution.
- Restart your computer normally.
- Press the desired key to open the BIOS menu. This key depends on the manufacturer of the program and the model of the computer. It usually charges on the first screen, which looks like a monitor. itcan be any of the following: Esc , Del , F2 , F8 , F10 or F12 .
- If the screen displays variable keys, look for the key to even open the BIOS, Setup, or BIOS menu.
- Check the main BIOS touchscreen to see if the hard drive is recognized and boot order if you need to make sure it is configured correctly.
Here are sample screenshots of the main BIOS filter with a properly recognized hard drive and CD, as well as a purchase boot screen with the hard drive first.
If the hard drive is really not recognized properly, you will need to replace the connecting cables or reset the BIOS settings to default values. Here are the steps to reset BIOS settings:
- Open the BIOS screen by following the steps above.
- You can usually find the “Restore Defaults” or “Configure Defaults” package – this can be a hotkey or a menu item.
- Select an overwrite option and answer “Yes” to the confirmation prompt.
- Then select the option “Youmove -> Exit and save changes. ”
Fix # 3: Run Automatic Repair
Windows automatic repair in some cases can recover some errors related to the trunk process. Here are the steps to access the automatic recovery from the installation CD:
- Boot everything from Windows disk
- Click “Install Next” on the installation website after choosing the correct language, time and papanketik entry.
- Click “Repair your computer” and select “Troubleshoot”.
- Click Advanced Options.
- Select “Automatic Repair” and select your operating system.
Here’s an example of what a startup recovery should look like after fully recovering the BOOTMGR file:
Fixing
Rebuild # 4: BCD With Bootrec.exe
As with the BOOTMGR Missing error, restoring your own computer can fix boot problems.
- Boot from the Windows installation CD.
- After selecting the correct language, duration and key entryrounds click “Repair your computer”.
- Select your Windows drive, usually
C:
, and click Next. - Select Command Prompt when the System Recovery Options window appears.
- Write the following command followed by a “Media attention” entry:
bootrec / recoverybcd
- If the program finds a larger Windows installation and asks if it can add it to the download list, Y
support is increased
Here is an example screenshot of the PC console output that should appear after Bootrec has repaired the BCD.
Fix # 5: Reset BIOS To Sony VAIO Notebook Settings
Sony.com email support will provide future solutions if your VAIO still displays this error:
- Remove any removable media such as USB drives, flash CDs, DVDs, etc.
- Reset BIOS default ringtone settings.
Here are the steps to reset VAIO BIOS when deploying Windows XP, Vista, 8, or 1:
- Disconnect all devices connected to the laptop.
- Restart the computercomputer and press any F2 key when the VAIO name appears.
- When the BIOS setup screen appears, be sure to press the right arrow key ( -> ) to select the type of output menu partition.
- Select Get All Defaults by clicking the down arrow.
- Press Enter with Load Optimized Defaults.
- In Load Optimized Defaults, use the arrow key and select And yes, then press Enter
- Press the arrow keys again to select Exit and press Enter
To reset VAIO BIOS if someone is using Windows 7:
- After restarting the laptop, press and hold my Assist button until a black VAIO screen appears on your current monitor.
- When the VAIO Care Rescue Mode touchscreen is displayed, use the arrow keys to launch BIOS setup [F2] and Enter
- Press the F9 key to reset the VAIO BIOS to its original default values.
media
Speed up your computer's performance now with this simple download.
Disconnect virtually all external devices connected to your computer.Remove all parts of the optical drive (CD / DVD / BD) and USB storage from the computer.Remove any additional devices installed on the computer.Reset the entire BIOS of the computer to default values.
Check BIOS.Reboot BIOS.At the moment, we are correcting the launch records. Microsoft Windows primarily relies on three sets of data to start your computer.Enable or disable UEFI Secure Boot.Activate my Windows partition.Use Easy Recovery Essentials.
If the keyboard does not start and no further troubleshooting is possible, you can easily recover the system by starting the computer by pressing the F10 key when the VAIO logo is displayed, or by pressing the ASSIST button when the VAIO is turned off.