How To Troubleshoot A Windows XP Installation Disc

This guide will show you how to go back to creating a Windows system recovery drive that you can use to restore Windows.

This helpful information applies to the following Windows XP solutions: Vista 7, 8, and 10.

Create A Dedicated Windows System Recovery CD

System Recovery CD, which will most likely load your version of Windows Recovery Menu and teach you how to recover and restore your system if you don’t have the original frozen CD.

You cannot install Windows from this type of floppy. To reinstall Windows, you need the original installation CD,CD / DVD / USB used to install Windows.

Create For Windows XP

The original Windows XP installation CD is itself included with the System Recovery CD. There is a small, separate process for creating a system repair disc, as in Windows Vista, Windows 7, Windows 8, or Windows 10.

To truly recover your computer, you need to go to the recovery console and run the various recovery codes. If these repair commands do not work, then you need to reinstall Windows XP.

If someone can’t just boot from the installation CD, you can use the Windows XP boot discs using the computer’s floppy disk as a drive to start the task and continue from the CD. Bootable floppies eliminate the need to use your bootable CD, but now the whole process requires an installation CD.

Follow these instructions to recover your computer using your Windows XP Personal CD:

1. Usually a Windows XP floppy disk is inserted into the floppy drive.
2. Restart your computeruter from DVD.
3. Press any key if you are still prompted to boot from CD.
4. From this dedicated home screen, press R to open the Recovery Console.
5. Enter the administrator password.
6. The command line should now be available.
7. The following commands can really help restore your computer:

    bootcfg / rebuild 

    chkdsk / r / f 

    fixboot 

8. Press Enter

after each command.

On older computers, the Recovery Console can be accessed without inserting a CD by following these steps:

1. Turn on the personal computer.
2. Press and holdI am hovering F8 at boot time.
3. Wait until the boot options screen for recovery appears.
4. Select Console
5. Press Enter
6. Enter the manager password.
7. Enter the restore commands above.

If the above recovery commands fail to recover your computer, try reinstalling Windows XP from the installation CD:

By reinstalling Windows XP, you and your family will erase all your personal files: design, music, movies. Back up your computer before proceeding.

1. Insert the installation CD and your computer.
2. Press any key on the screen. Press any key to boot from CD.
3. Press ENTER to start the configuration process.
4. Read the license agreement and accept it even by pressing F8
5. Select your current Windows XP installation from the list, then click R
6. Follow all instructions to reconfigure Windows XP.

If you and your family are unable to boot from CD, follow these instructions to set up a set ofWindows XP boot / installation disks (boot disk), which can also be used from your computer’s floppy disk, then continue creating the installation CD:

1. Load the required installation hard drives corresponding to the version of Windows XP you have installed:
   • Windows XP Home Edition SP2
   • Windows XP Professional Service Pack 2
2. Unzip the files to your main desktop.
3. Make sure there are 6 blank disks available. You will receive this with a message stating that you will get the first run:

   How do I reinstall Windows XP without a CD?

    This program creates installation boot disks for Windows XP. To get these floppies, you need half a dozen high-density, formatted, blank floppies.Specify low drive for copying images: 

4. Enter most of the drive that normally contains your floppy disks – example: A: – and press Enter
5. Insert the first blank disk into floppy compilation when you receive this message:

    Insert one of these floppy disks into a drive letter. This disk becomes the boot disk for Windows installation.XP.When finished, press any key. 

6. Continue the process until all 4 disks have been created.
7. Fully insert the floppy drive you created into the drive and restart the current computer.
8. Booting from Hard Drive
9. Continue reading the instructions to start the process. Make sure you have an installation CD and need it to complete the specific reinstallation process.

You can also create a complete MS-DOS boot diskette using the following instructions:

1. Insert a blank floppy disk here into your computer’s floppy drive.
2. Go to My Computer
3. Right click on A: , this is almost always the drive letter of my floppy disk.
4. click format
5. Activate the option “MS-DOS create a new dangerous disk”
6. Click Start.

If you do not have the original installation CD to create the System Recovery CD, please load the Easy Recovery Essentials Recovery CD. You can repair, repair or restore your working computer:

1. Download Recovery Easy Essentials here.
2. Capture any image. Follow these instructions to properly burn a bootable ISO, as creating a bootable CD can be especially tricky! In addition, these instructions explain how to create a bootable USB or EasyRE recovery USB.
3. Select “Restore”.
4. Automatically wait for the process to end
   
   Speed up your computer's performance now with this simple download.

   Can Windows XP be reinstalled?

   How do I reinstall Windows XP on an old computer?

   

   

   Donald Serrano

   Related Posts:

   • 

     The Easiest Way To Fix Vcenter Converter Agent…

   • 

     Troubleshoot Adobe Reader Installation Error 1321

   • 

     FIX: How To Repair Windows XP Without A Disc

   • 

     Steps To Fix ISO Problems When Booting Windows Recovery Disc

   • 

     The Best Way To Fix Xbox Update Disc Issues

   • 

     Solution To Erase Laptop Without Recovery Disc Issue