In this guide, we are going to uncover some of the possible reasons that might cause the dump file to be saved to hawx.exe.dump and then provide some possible recovery methods that you can try to fix the problem.
The message “Unable to print at 76” is constantly displayed for one of the following reasons:
I. The tip, a foreign object like a paper clip or chiselled paper, got stuck in the machine name=”step_1″>
1. Before troubleshooting for beginners, it is recommended to transfer faxes to another fax machine so that unimportant messages are lost. At the same time, all received faxes If the current error message is displayed on the screen, it may be automatically stored in the machine’s memory because the machine cannot print In this context, if the faxes are in memory, you can send them to another machine so that you you can fax them without losing them.-
If you really don’t want to send a fax, go to approach 3.
– If recipients want to send and demonstrate faxes, skip to step 2.
Vaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa! Important information from your fax Another sending machine, you must have these station IDs already programmed into your machine in order to receive alertserror message “Unable to print 76”. If you had not programmed all station IDs into the machine before the error occurred, you will not be able to send faxes from memory. Go to step 3.
d. Press â–² or possibly â–¼ to select data transfer. Click OK.
e. â–² Simply press â–¼, or to select fax transmission. Click OK.
Assistance in AaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAACA Then press Stop/Exit, go to step 3.
“Step f.
f. Click Mono Start. Stored faxes will be sent to the last number. With continued progress 3.
3. Hold the fingers on both sides of the device in the market with both hands to bring the scanner cover into the working position.
– See the scanner body support arm on the left side of the machine Close?
documentation and cover, return to step 3, open to open the scanner cover.
Fortect is the world's most popular and effective PC repair tool. It is trusted by millions of people to keep their systems running fast, smooth, and error-free. With its simple user interface and powerful scanning engine, Fortect quickly finds and fixes a broad range of Windows problems - from system instability and security issues to memory management and performance bottlenecks.
1. Download Fortect and install it on your computer
2. Launch the program and click "Scan"
3. Click "Repair" to fix any issues that are found
4. You carefully examine the left (1) and right (2) corners and center I’m inside, I would say, machines, and remove any pieces of paper that could get stuck.
5. Move the print head by hand from left to right and carefully look for pieces of paper stuck under the print head. Remove them, if any. When
The print head will literally be in the right corner, hold down the Stop/Exit key for at least 5 seconds until the print head moves to the center. This way you can make sure that the right corner has changed to the piece of paper inside.
6. Leave the scanner cover open and turn the device upside down so you can see the back of it.
7.Open the jam recovery cover at the top rear of the machine by sliding the two levers (1) together.
8. Look inside for debris or jammed paper. Delete them if any.
9. Close the Jam Clear Cover and rotate the machine forward.
ten. Gently hide it with the scanner finger grips on each side.
Note – If the display shows “Unable to 76” steadily, navigate to the appropriateat slot 11.
– “impossible if Print 76” go to disappear, go to step 12.
11. Unplug your network device for about a minute, and then plug it back in.
If the message “76 cannot be printed” is still displayed on the screen, go to step 13.
– If the Unable to print 76 option has been removed, skip step 12.
Click “Settings” b. Press â–² or â–¼ to select Ink/Maint. Click OK. c. Simply press â–² or â–¼ to select Print. Click OK. d. You press or â–² â–¼ to select the quality (for white line printing). Click OK.
