In this article, we are going to find out some of the possible causes that can prevent your SD card reader from working, and after that, we will show you the possible recovery methods that you can try to fix the problem.
Almost always, a common reason for an SD card not being detected is a faulty, incorrect, or outdated primary card reader driver. The first thing to do is make sure your runners are healthy. Automatic update of new driver – Driver Easy will automatically familiarize with your system and find the correct prompt for your card reader.
Summary:
Does your SD card reader not work when you insert an SD card? Why is this happening? How to solve this problem? In this article, MiniTool shows 4 solutions to revert to a non-working SD card reader.
SD Card Reader Solutions Not Working On Windows 10
Now that you have explored the possible factors causing an SD card reader to stop working on a running laptop, you can try the following solutions one by one when the built-in SD card reader or external SD card reader is cards doesn’t work. Job.
Check for hardware problems. Windows
Eliminate hardware and device problems. A
assigns a new authorization letter to the SD card.
Update SD.Up Card Proxy Driver
Please remove any viruses or malware from the SD card.
Covet. Attacking viruses are a nasty problem that can appear anywhere, anytime. To keep your SD card data natural, you need to protect your SD card and scan it regularly for viruses.
The target group is incompatible with your operating system and memory card.
Drive letter conflicts with remaining drives.
The card reader driver is out of date or literally missing.
Your card is infected with a virus.
Why is my SD card not showing up on my computer?
The connection between the SD card and your computer is bad due to damaged USB to USB port, cable or card reader.
Your SD card has been write-only protected.
Your SD card’s drive letter is badly missing.
The SD card driver is corrupted.
Section missing on SD card.
Your SD card is damaged.
Check SD card status using CHKDSK command or MiniTool Partition Wizard.
Assigns a drive letter to the entire SD card.
Update your SD card driver.
The write protection is currently removed fromSD cards.
SD Card Not Showing Or Not Working Solution Overview
There are 5 effective ways to fix SD plastic parts not showing or not showing, including evaluating the SD card on another PC, changing the exact drive letter, running CHKDSK, etc. Which solution works well:
Solution. Test your SD card on another PC or new reader.
Solution card 2. Change the drive letter of the unrecognized card.
Small solution for SD. Run CHKDSK Make to the SD Card Detectable
Fortect is the world's most popular and effective PC repair tool. It is trusted by millions of people to keep their systems running fast, smooth, and error-free. With its simple user interface and powerful scanning engine, Fortect quickly finds and fixes a broad range of Windows problems - from system instability and security issues to memory management and performance bottlenecks.
1. Download Fortect and install it on your computer
2. Launch the program and click "Scan"
3. Click "Repair" to fix any issues that are found
If you have any of the following problems with your SD card, it means that this SD card is in some kind of tricky state, and you may even lose the understanding stored on your card:
SD card not recognized
SD card is not recognized by PC, Android phone, camera or camcorder.
The SD card is never read on a mobile phone, computer, camera or video player.
SD card not displayedWorks on PC, camera, Android phone, etc.
Why did my micro SD card suddenly stop working?
To find solutions to help you fix someone’s SD card problems, you can first check and also see how and why detection and display problems on SD, SDHC, SDXC cards and Micro SD.
Why The SD Card Is Not Displayed
This is a common issue where the SD card is not showing up on Windows Boost PC. Check out the list of possible factors and you can find the exact reason why your contact SD card is missing or recognized
error between SD certificate and computer.
Missing drive letter on your SD card.
Your file system is displayed, SD card is not recognized or damaged.
The software driver is out of date.
The SD card of the card is damaged by a virus.
These problems are not uncommon for PC users. Therefore, it is very important to know how to fix or even improve these problems. A similar problem also occurs, from time to time you can follow this link. Flash drive shows no improvement on Mac to solve this trial From your SD card to your Mac.
Based on the reasons stated above, we have compiled another list of solutions to treat this condition. You can try them one by one to fix the corrupted memory card that hasn’t been detected and no data loss will occur.
There Is At Least One Solution. Check Your SD Card On Another PC With A New Card Reader
You will probably do a test on SD credit cards to see if they are damaged or not. The damaged SD card needs to be replaced. You can use h2testw to run a diagnostic test on this board to make sure it is in normal working condition. Using a damaged SD card may result in data loss at any time.
Applies to: Actual problem with the computer interface or SD card reader.
If this problem occurs, it is assumed that the SD card or hard drive is not showing on the PC. First you need to check if there is a problem with the connection of the corresponding SD card. Here you have two options to test your own undetected or undetectable SD card:
Replace your SD card reader in the future or a new USB SD card adapter.
Connect the SD card directly to another PC.
Then you can check your SD card and card to see if your computer has bumps or not. If it really works with a new SD card reading the computer, or a new one, then it is no longer bad card. The card reader must be seriously defective.
If your SD card doesn’t work on another PC or new card reader, the problem is with the SD card. Read on to find better solutions to this problem.
Solution With. Change The Drive Letter Of The Unknown SD Card
STEP 1 – Connect the player to your PC.Connect STEP – check in the device manager.The STEP is much more – update your drivers.STEP FOUR – Make sure the disc is recognized.
Applies to: There is no writing floppy disk on the SD card, or there is a conflict with the fire letter.
If your SD card is very well connected to your computer, but IT doesn’t show up in File Explorer, you can go to Disk Management to actually see if the drive letter is gone. This
If so, you can assign a new drive letter to your bank card and make it recognizable by following the most important steps below:
Step 2. Find the SD greeting, right-click the partition and select Change Drive Letter and Path.
Step 3. Click “Add” on the pop-up window to make sure you are assigning a drive letter to your SD card.
Solution 3. Run CHKDSK To Fix SD Card Error
What do I do if my SD card slot is not working?
SD card charges: no card detected due to corrupted fileloving system.
Step 9. Right click “My Computer / This Computer”, then select “Manage” and click “Disk Management”. Find the device on the reader card and check if the computer recognizes your existing memory card or.
If this is not only detected, proceed to the next steps using the CHKDSK command.
Step 3. Type: chkdsk g: / and press Enter. (g is the drive letter of your awesome memory stick).
The card reader or SD card is dusty / dirty. In this case, the computer will not look at the SD card. So check if your pCustom card reader or SD card. If not, clean the adapter (also known as a card reader) and SD card with a cotton or woolen cloth lightly dampened with alcohol and water.
Or type: chkdsk D: / f and / offlinescanandfix press Enter. This will always automatically check and fix your main SD card memory errors and recognize all cards again.
Solution 4: Update Your SD Card To: Driver
It is true that SD will not be moved due to an outdated or problematic file driver.
Go to device manager, here you will see the disk map listed. If there is another yellow mark next to it, the problem is most likely with the driver. Then you will need to update your driver. Here’s how they can help you:
Step 2. Go to “Control Panel> System> Device> Di Manager”.
