Approved: Fortect
Here are some easy steps to help you fix your WiFi error codes issue.
Error code
Error description
0x0031
ARP cache entry not found
0x0002
The scan command is issued when a specific module is already associated with an access point
0x0003
AP not found
- Is the entered SSID correctly connected to the access point?
- Is Joan Resource Available?
- Is the code correct?
- Is the access point using WPA2-PSK encryption?
- Does your access point have a 2.4 GHz bandwidth?
0x0004
An invalid PSK is issued while a module client tries to connect to an AP with WEP security enabled
0x0005
Invalid feed
0x0006
The link is not anchored or part of the status is not anchored
0x0008
Deauthentication received from AP
- Did you enter the password correctly?
0x0009
Failed to connect to the access point while “attaching”
0x000A
Invalid string
0x000E
1) Authentication failed while “attaching”
2) AP was not found on attach and was found on scan
0x000F
Missing AP tag on attach
0x0013
Non-existent MAC address specified in “Disassociate” command
0x0014
Wi-Fi Direct or EAP configuration should not occur
0x0015
Failed to allocate memory orChecksum for store design
0x0016
The connection command information is incorrect or insufficient
0x0018
Command to press a button before the previous button command expires.
0x0019
1) Access point found
2) no errors while attaching
- Is the correct SSID of the access point entered?
- Is Joan’s device out of reach?
- Is the password correct?
- Is the access point using WPA2-PSK encryption?
- Does the access point have a bandwidth of 2.4 GHz?
0x001A
Frequency not supported
0x001C
EAP configuration error
0x001D
P2P configuration error
0x001E
I cannot help you start negotiations about the owner of the group
0x0020
Unable to join
0x0021
The order is, of course, in the wrong status
0x0022
Query for GO parameters sent after incorrect operation
0x0023
Form for impossible access point
0x0024
Approved: Fortect
Fortect is the world's most popular and effective PC repair tool. It is trusted by millions of people to keep their systems running fast, smooth, and error-free. With its simple user interface and powerful scanning engine, Fortect quickly finds and fixes a broad range of Windows problems - from system instability and security issues to memory management and performance bottlenecks.
Incorrect scan input parameters for Scan command
0x0025
Order since restoration
0x0026
Possibly invalid parameters on command request
0x0028
PSK length is less than 12 or more than 63 bytes
PSK is longer than 31 characters.
- Make sure your valuable password is too long or too short.
0x0029
Failed to remove or install company certificate (Install Certificate)
0x002A
Failed to negotiate with group owner in Wi-Fi Direct mode
0x002B
Cross-site assignment failed here in Wi-Fi Direct / WPS mode due to timeout
0x002C
When a command is issued that forces the host to join or create itself automatically when the module is started internally
0x002D
WEP key length is wrong
0x002E
ICMP request timed out
0x002F
Size yes total ICMP is the maximum data limit
0x0030
The size of the sent packet exceeds the specified or specified length
0x0032
UART validation expired
0x0033
Fixed baud rate is not supported when connecting to an access point.
0x0037
Invalid WPS PIN
0x0038
Invalid WPS PIN length
0x0039
Invalid PMK length
0x003a
SSID for PMK generation does not exist
0x003b
SSID for incorrect PMK generation (more than 4 bytes)
0x003C
Ribbon not supported
0x003D
Invalid user memory configuration relative to length
0x003E
The length of the http command error (greater than the number of characters for the http command, which is probably mentioned in the PRM).
0x003F
Data packet rejected
0x0040
Basic WEP not specified
0x0041
Wrongi am PSK length
PSK is longer than 31 characters.
- Make sure your username and password are too long or too short.
0x0042
PSK and / or possibly PMK not specified
0x0043
The security mode specified in the enlist command is invalid
0x0044
Beacon count error reaches maximum number of missing luminous samples (death due to beacon negligence)
0x0045
Death by a petitioner
0x0046
Deauthentication received from AP after channel change
0x0047
Missed sync
0x0048
Authentication timed out
0x0049
The link has expired
0x004A
BG search on some channels may be prohibited
0x004B
The scanned SSID and SSID specified in Join no longer match
0x004C
Due to the excess of the number of clients, the largest number of supported stations
0x004D
The specified HT features are still not supported
0x004E
<
Speed up your computer's performance now with this simple download.
When people lose connection, they don’t get a response code, they don’t get a response at all. Response codes (eg 250, 404, 500, etc.) come directly from all servers. If you can’t connect to the current server, you won’t have a computer. Depending on how you write your HTML, you may receive a socket error or alternatively a crash.
WPA Key or Security Key: This is definitely the password for your MLM’s wireless connection. It is also known as a Wi-Fi security key, WEP key, or WPA / WPA2 passphrase. This is another name for your modem or router.
There are many possible reasons why your internet connection is not working. Perhaps your router or modem is not busy with a date, your DNS cache or IP contact information may not be available, or your entire ISP may not work in your region.not. The problem can be as simple as poor data transfer over Ethernet.
