If you have canon ir2270 error codes on your PC, this guide will help you fix them.
Approved: Fortect
Error 853 There are ways that your ir2270 definitely does not have a UFR or UFR / PCL network printer manual.
During production control, the reading of the main thermistor is always less than 30 ft.degrees continuously for 200 ms and even more than 1 s after starting under power. Even though the start command is similar to this, the thermistor’s prevailing reading is consistently below 70°C for 200ms or 2 more seconds after power-up. During the run command, analyze the main thermistor below 120 degrees C continuously for 300ms 6s after power on. Start command is not bypassed 30 seconds after mains power is turned on.
The required thermistor reading is 250°C or higher continuously for 200ms.
The hardware world detects the main thermistor overheating within 200ms.
Thermistor reads 295°C or more continuously for 200ms.
At startup during control, the reading of the main thermistor is constantly below 115°C because 400 ms 1.3 s after Wow, it really shows 100°C. Main thermistor continuously below 130°C for 400ms 1. sc after 140°C.
With regular temperature monitoring, the base thermistor reading is below 140°C for at least 400ms.
Approved: Fortect
Fortect is the world's most popular and effective PC repair tool. It is trusted by millions of people to keep their systems running fast, smooth, and error-free. With its simple user interface and powerful scanning engine, Fortect quickly finds and fixes a broad range of Windows problems - from system instability and security issues to memory management and performance bottlenecks.
