If you have canon ir2270 error codes on your PC, this guide will help you fix them.
1. Download Fortect and install it on your computer
2. Launch the program and click "Scan"
3. Click "Repair" to fix any issues that are found
Speed up your computer's performance now with this simple download.
Error 853 There are ways that your ir2270 definitely does not have a UFR or UFR / PCL network printer manual.
Code: E000-0001
Description: Primary fastener assembly temperature abnormally high.
During production control, the reading of the main thermistor is always less than 30 ft.degrees continuously for 200 ms and even more than 1 s after starting under power. Even though the start command is similar to this, the thermistor’s prevailing reading is consistently below 70°C for 200ms or 2 more seconds after power-up. During the run command, analyze the main thermistor below 120 degrees C continuously for 300ms 6s after power on. Start command is not bypassed 30 seconds after mains power is turned on.
Remedy: Restore appearance in mode: COPIER Service>FUNCTION>RESET>ERROR. Replace main thermistor. Replace the DC controller board.
Code: E001-0000
Description: The temperature of the fixing device is considered abnormally high.
The required thermistor reading is 250°C or higher continuously for 200ms.
Remedy: Reset Status in Mode: Service COPY>FUNCTION>RESETC>ERROR. Replace main thermistor. Usually replace the DC controller board.
Code: E001-0001
Description: The temperature of each of our fasteners is abnormally high.
The hardware world detects the main thermistor overheating within 200ms.
Remedy: Reset status in mode: COPIER Service>FUNCTION>RESET>ERROR. Replace DC controller PCB.
Code: E001-0002
Description: The temperature of the accident prevention kit is abnormally high.
Thermistor reads 295°C or more continuously for 200ms.
Remedy: Resetting the status to COPIER Maintenance>FUNCTION>RESET>ERROR. Replace the transmission thermistor. Replace the DC controller board.
Code: E002-0000
Description: High-altitude mount temperature rocket just failed
At startup during control, the reading of the main thermistor is constantly below 115°C because 400 ms 1.3 s after Wow, it really shows 100°C. Main thermistor continuously below 130°C for 400ms 1. sc after 140°C.
Remedy: Reset Transport Mode Status: COPIER Service>FUNCTION>RESET>ERROR. Replace a better thermistor. Replace the DC controller board.
Code: E003-0000
Description: The fuser temperature is too low after a long wait.
With regular temperature monitoring, the base thermistor reading is below 140°C for at least 400ms.
Remedy: Reset status in function: COPIER maintenance>FUNCTION>RESET>ERROR. Replace known thermistor. Replace the DC controller board.
Fortect is the world's most popular and effective PC repair tool. It is trusted by millions of people to keep their systems running fast, smooth, and error-free. With its simple user interface and powerful scanning engine, Fortect quickly finds and fixes a broad range of Windows problems - from system instability and security issues to memory management and performance bottlenecks.
1. Download Fortect and install it on your computer
2. Launch the program and click "Scan"
3. Click "Repair" to fix any issues that are found
Speed up your computer's performance now with this simple download.