Approved: ASR Pro
If connection error 718 occurs on your computer, this article can help you troubleshoot it. When an end user in particular tries to access the Internet over a dial-up connection, he may encounter a 718 PPP error. Basically, the above means that the computer was unable to connect to the Internet. PPP is used to establish any connection between a system and a device through a serial modem.
Error 718: PPP timeout occurs when you try to connect your computer over a dial-up network and the connection simply fails. When you try to connect to a specific dial-up network using a modem, you may receive the following marketing error message on your computer screen:
Error 718: The computer you are connecting to cannot establish a remote network connection.
In this case, please check your password and try again.
Error 718: PPP Timeout A PPP call started but ended because the remote computer did not respond within a reasonable amount of time. This could be due to poor line quality or a problem on the server.
Note. Point-to-Point or PPP is the preferred communication protocol for establishing a connection between computers afterconclusive interface. PPP is commonly used to connect a PC to a server over a telephone line using a serial modem. For example, you can use a PPP connection when you log in and connect to your Internet Service Provider (ISP) server.
There are a number of reasons that prevent you from eventually establishing PPP correlation and therefore generating a correct PPP error. Some of the most common pathogens are:
- Poor telephone line.
- Incorrect phone number used to connect to ISP server.
- Incorrect server settings on the computer.
- Invalid username, possibly a password to establish a connection.
- Invalid ISP server.
- You may need to configure the modem initialization section to establish a persistent connection.
The solution to error 718 depends on the cause. Here are some of the methods you can use to troubleshoot the current error:
The first task is to make sure that there is no noise on the phone line and the phonethe cord is OK. You can easily do this by connecting your phone to a device that supports a telephone line. If you really can’t do anything other than dial a phone number or speak correctly, you need to contact your phone company for a solution.
Method two: make sure you are dialing the correct number
Error 178 can occur if you are using the wrong method to connect to your ISP’s server. You can contact your ISP or review the documentation that came with your purchase to make sure you have the correct number.
On a Windows XP computer, open Control Panel, click Network, click Internet Connections, click Network, click Connections, and then double-click Dial-up Connection. In the Connection Connection Name dialog box, click the Properties button. This is where you open all the tabs and in particular the settings defined by your ISP.
You can also try to create a new connection and request it to find out if this solves the problem.
In order to establish a PPP connection, it is important to provide the correct username and password so that your family members can authenticate your ISP’s server.
So make sure you are using the correct username and account information. If you have forgotten your username or password, you may need to contact your ISP for help.
You can also email or call your ISP to make sure their servers are working properly, because if every ISP goes down you won’t be able to connect, or
Dark and corrupted modem driver files can also cause error 178 on the system. Therefore, it is highly recommended that you visit your computer manufacturer’s website and then download and purchase updated drivers if available.
Speed up your computer's performance now with this simple download.
Disconnect and reconnect the modem.Check your settings normally Modem names, including the username and password of your internet service provider.Restart your computer and check for this problem.Update your modem driver.Connect the modem to any computer and see if the ISP is the problem.If the problem exists with your ISP, please contact them to solve it.
Error 718 occurs when a PPP connection has been initiated but cannot be established because the host computer of the remote PC did not respond in a timely manner or did not provide an important valid response. One possible reason is that the VPN server did not receive an assignment request after changing the router configuration.
Step 1. Check your internet connection. Checking your internet connection should always be the first port for most calls whenever an internet error occurs.Only a step is to update the modem drivers.Step 4 – Make sure the login details are correct.Step 4 – Clean up the registry.