Where do I find the BIOS configuration jumper?

Locate the BIOS setup jumper (depending on the model, it might be labeled CONFIG, RECOVERY, or BIOS, see example below). Set the configuration jumper to the normal position of pins 1-2 to the specific position of pins 2-3.

What's the default CMOS jumper in Windows 10?

Usually the CMOS jumper is in positions 1-2 and 2-3. Move the jumper from the default position 1-2 to position 2-3 to clear the CMOS. Wait 1-5 minutes, then return it to its standard position. Turn on the systems. On some systems, you may need to enter BIOS and restore factory defaults. Turn off all peripheral devices for your computer.

Intel Bios Jumper Settings

Table of Contents

Approved: Fortect

1. Download Fortect and install it on your computer

2. Launch the program and click "Scan"

3. Click "Repair" to fix any issues that are found

Speed up your computer's performance now with this simple download.

Here are some simple steps that can help you fix your Intel BIOS jumper settings issue.

Documentation

Content type Installation and configuration

Element ID 000006843

Last checked 13.09.2017

The Intel® Desktop Motherboard DP45SG contains two built-in jumpers that are not described in the manual or product specifications: the SPI_CON hoodie and the CMOS jumper.

spi_con jumper
The spi_con jumper must also be connected to pins 1 and 2. If the jumper removed this header, the card will not boot at all.

CMOS jumper
The CMOS jumper will be used to fine tune the CMOS to reset the CMOS through configuration. The result is the same as removing the CMOS battery. In this jumper use:

Disconnect power from the system.
Open ours and remove the jumper. Insert hooks 1 and 2 on pins 2 and 3.
Efficiency on the new and pivot system is over.
Wait 10-15 seconds.
Approved: Fortect

Fortect is the world's most popular and effective PC repair tool. It is trusted by millions of people to keep their systems running fast, smooth, and error-free. With its simple user interface and powerful scanning engine, Fortect quickly finds and fixes a broad range of Windows problems - from system instability and security issues to memory management and performance bottlenecks.
1. Download Fortect and install it on your computer
2. Launch the program and click "Scan"
3. Click "Repair" to fix any issues that are found